Nowadays, more and more customers begin to do plastic thing business, so plastic injection machine become more and more important, but not every customer knows how to maintain the plastic injection machine, it is well known that machine inspection and maintenance is a key point to run it which can ensure the normal operation of the machine, reducing the failure to maintain the machine's performance, service life, safe operation and shortening downtime caused by breakdown.
Daily Inspection
1. To see the emergency stop button can cut off the motor power supply of the pump.
2. Keep clean surroundings of the machine and nearby place.
3. Check the temperature and barrel is normal or not
4. Check the safe door by manual or semiautomatic.
5. Check the water leaking for the mould and machine running.
6. After sometime for the machine running, checking the oil temperature whether has reached 50℃or not, checking the cooling water temperature, the oi; temperature should keep at 30-50℃.
 |
| Plastic Injection Machine |
1. Check the screw is tight or not on the safety of mechanical parts.
2. Clean the cooling parts’ inner and outer walls.
3. Clean the inner part of the oil box.
4. Clean the dirty on the oil filter and air filter.
5. Check that whether the pressure oil is need to be changed or not. If the oil is bad, you must to change the new oil.
6. Clean the dust on the surface of the fan motor , and add the lubricants on the bearing.
7. Check the wire.
8. Check whether the machine has the noisy or not.
9. Recheck the fuselage level
Above all, the most important thing to the injection machine running is the machine inspection and maintenance, if you make a good maintenance to the machine, it will run longer time and have perfect performance.
Martina
Email: contact@dakumar.com
Phone/what's APP: 0086+15215807221
