20L Bucket Production Line

Recently buckets become a hot topic among customers, a high production quantity bucket line can better help customers gain the market, and can make the investment return in a short time. DKM can offer you a unique complete 20L bucket production line with a cycle time of 14.8s, which means in one hour you can get around 243 PCS, normal machine cycle time is around 25-30s, you can see our line can reach double quantity.

For the machine, DKM developed a special 700T injection machine for the bucket.

Below is some advantage of this new machine :

1. using electrical material charging which can reach molding opening and material charging at the same time, it better reduces the cycle time a lot.

2. Use a special machine screw and barrel according to the bucket plastic material to increase the plasticizing rate.

3. With the servo motor and electrical material charging, it can save energy around 60-80% which can better help customers solve the high-cost electrical problem.

For the mold, we also have done some improvements according to customer’s feedback:

1. improving the mold cooling system and gaining four patent inventions.

2. Add cooper on the core top, cavity bottom, and bucket mouth place to make the cooling better to reduce the cycle time

3. using valve gate to make the filling faster and gate place with good looking, also it can better help customer solve the problem of hard filling fully with low MFI material.

After checking our main improvement for the 20L bucket production line , please come to us for further information if you are interested in it.

Martina 

Email: contact@dakumar.com

Phone/whatsapp: 0086+152 1580 7221