14.8s bucket production line

With the rapid economic progress, people's demands for bucket are increasing day by day, customers’ demanding for the product quality become higher and higher, So it is important to choose a good  supplier.

DKM specializes in providing customers with complete bucket  production line solutions with different volume from 5L- 20L with different type(square, round, oval...), we have successfully delivered nearly 100 paint bucket production lines to different countries and got good feedback.

After continuous innovation and improvement, our 20L in mold labeling paint bucket production, work with 600ton high speed injection molding machine and side enter robot, cycle time is 14.8 s  ,per hour output is about 240pcs.

Below are some advantages of this 14.8s bucket production  line:

For the machine

1.  servo motor replaces the traditional hydraulic motor,which can reach molding opening and material charging at the same time, it better reduces the cycle time a lot.
2.  Using electrical charging, saving 50%-70%   electric energy compared with ordinary     injection molding  machine  ,which   can  better help customers solve the high-cost  electrical problem.
3.  Use a special machine screw and barrel according to the bucket plastic material , the  screw speed is accelerated by 20-50%, the plasticizing rate is higher

For the mould

1. The hot runner needle valve system is adopted to reduce the cavity pressure and increase the life of the mold.
2. Add cooper on the core top, cavity bottom, and bucket mouth place to make the cooling better to reduce the cycle time
3. The product has a good water sealing structure, and has passed the drop water sealing test from a height of 1.5 meters to  3 meters.

If you are interested in such bucket production line,welcome let me know.

 

Chole 

Email: sales03@dkm.com

Phone/what's app: 0086+189 8961 2007